TM 9-2320-365-34-2
3-13. CAM ROLLER FOLLOWERS REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rocker arms and push rods removed (para
3-12).
Fuel filter removed (TM 9-2320-365-20-3).
Fuel governor removed (para 4-9).
Air compressor removed (para 11-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-300 lb-in. (Item 83, Appendix
B)
Adapter, Socket Wrench (Item 3, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Socket Wrench Attachment, Screwdriver (TM 9-2320-
365-20)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Gasket (Item 55, Appendix F)
Gasket (3) (Item 63, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
31, Appendix C)
Solvent, Dry Cleaning (Item 81, Appendix C)
Rag, Wiping (Item 59, Appendix C)
a. Removal.
(1) Loosen hose clamp (1) on oil fill hose (2).
(2) Remove oil fill hose (2) from oil fill tube (3).
(3) Remove two screws (4), washers (5), oil fill tube (3), and
gasket (6) from center side cover (7). Discard gasket.
3-95
