TM 9-2320-365-34-2
6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT (CONT)
(10) Remove self-locking nut (13), screw (14), clamp (15) and
transmission external harness (1) from frame (16).
Discard self-locking nut.
(11) Remove clamp (15) from transmission external harness
(1).
(12) Remove transmission external harness (1) from vehicle.
b. Installation.
(1) Position transmission external harness (1) in clamp (2).
(2) Install clamp (2) on frame (3) with screw (4) and self-
locking nut (5).
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
NOTE
Perform step (3) on serial number 6510032369
and higher.
(3) Connect transmission external harness (1) to internal
transmission harness connector (6).
6-40
