TM 9-2320-365-34-2
7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT)
(3) Remove lifting device from chain.
(4) Remove two bolts, washers, and chain from torque
converter module (1).
(5) Position profile gage in torque converter module (1)
with profile gage bolt.
(6) Tighten profile gage bolt to 18-22 lb-ft (24-30 N m).
NOTE
Refer to Table 7-2 Torque Converter End
Play Shim Chart for correct shim thickness.
(7) Measure dimension "A", constant tool height should be
3.937 in. (10 cm). Record measurement.
(8) Measure dimension "B". Record measurement.
(9) Subtract dimension "B" from dimension "A" (constant
tool height) to determine dimension "C" (A - B = C).
7-16
