TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
(13) Remove five bolts (15) and transmission lifting bracket
from adapter housing module (16).
(14) Position five bolts (15) in adapter housing module (16).
(15) Tighten five bolts (15) to 42-50 lb-ft (57-68 N·m).
(16) Install seal (17) on oil fill tube (18).
(17) Install oil fill tube (18) in main housing module (19).
(18) Position oil fill tube clamp (20) on transmission (1) with
screw (21).
(19) Tighten screw (21) to 37-45 lb-ft (50-61 N·m).
NOTE
Perform steps (20) and (21) if spur gear
was removed from transmission serial
number 6510032369 or higher.
(20) Position spur gear (22) on transmission (1) with 10
bolts (23).
(21) Tighten 10 bolts (23) to 18-22 lb-ft (24-30 N·m).
7-30
Change 1
