TM 9-2320-365-34-2
b. Installation.
(1) Apply a small amount of grease to outside edge and
spring cavity of pinion seal (1).
(2) Install pinion seal (1) in front differential carrier (2).
(3) Visually verify pinion seal (1) is properly seated.
(4) Install yoke seal (3) on drive yoke (4).
(5) Install drive yoke (4) on pinion shaft (5) with drive yoke
nut (6).
(6) Tighten drive yoke nut (6) to 920-1130 lb-ft (1248-1532
N·m).
NOTE
Step (7) requires the aid of an assistant.
(7) Remove drive shaft (7) from leaf spring (8).
Change 1
9-20.1/(9-20.2 Blank)
