TM 9-2320-365-34-2
13-12. FRONT LIFTING BRACKET REPLACEMENT (CONT)
WARNING
Lifting beam weighs approximately 75 lbs (34
kgs). Attach a suitable lifting device prior to
installation. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
Left and right side lifting beams are installed the
same way. Right side shown.
(11) Position lifting beam (12) in front lifting bracket (1) with
two pins (13).
(12) Perform step (11) on left side lifting beam.
e. Follow-On Maintenance.
(1) Install transmission oil fill tube (M1078/M1079) (TM 9-
2320-365-20-3).
(2) Install engine oil fill tube (TM 9-2320-365-20-2).
(3) Install fuel tank (TM 9-2320-365-20-3).
(4) Install hydraulic reservoir, if equipped (TM 9-2320-365-
20-4).
(5) Install radiator overflow tank (TM 9-2320-365-20-3).
(6) Install spare tire retainer (TM 9-2320-365-20-3).
(7) Install intake air cleaner (TM 9-2320-365-20-3).
End of Task.
13-52
Change 1
