TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
NOTE
Perform step (17) on M1081.
(17) Install six button plugs (23) in two door posts (24).
NOTE
Perform step (18) on all models except
M1081.
(18) Install two button plugs (25) in door posts (24).
NOTE
Left and right side door catch strike plates,
check valve boots, and door seals are
installed the same way. Left side shown.
(19) Position door catch strike plate (26) on door post (24)
with threaded plate (27), shim (28), and three screws
(29).
(20) Tighten three screws (29) to 70-85 lb-in. (8-10 N·m).
(21) Install ventilation check valve boot (30) in door post (24).
(22) Install two door seal (31) on cab (2).
(23) Perform steps (19) through (22) on right side door catch
strike plates, check valve boots, and door seals.
15-30
Change 1
