TM 9-2320-365-34-2
3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
NOTE
Perform steps (8) through (10) on engines
with balance plate removed.
(8) Apply sealing compound to the threads of eight bolts
(16).
(9) Position flexplate assembly (17) and three flexplates (18)
on hub adapter (14) with plate (19) and eight bolts (16).
(10) Tighten eight bolts (16) to 76-94 ft-lb (103-125 N m).
NOTE
Perform steps (11) through (13) on engines with
ring gear removed.
(11) Apply sealing compound to the threads of eight bolts
(16).
(12) Position gear and disc assembly (20) and three shims
(18) on hub adapter (14) with plate (19) and eight bolts
(16).
(13) Tighten eight bolts (16) to 76-94 ft-lb (103-125 N m).
3-36
Change 1
