CAB FRONT SUPPORT REPLACEMENT/REPAIR

Follow-On Maintenance. - TM-9-2320-365-34-2_733

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
677

TM 9-2320-365-34-2 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-365-20-3). Air tanks drained (TM 9-2320-365-10). Steering wheel removed (TM 9-2320-365-20-3). Instrument panel removed for access (TM 9-2320-365- 20-3). Kick panel removed (TM 9-2320-365-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Pan, Drain (Item 36, Appendix B) Goggles, Industrial (Item 25, Appendix B) Sling, Cargo (Item 48, Appendix B) Tool, Cab Support (Item 5, Appendix D) Bar, Spreader (Item 16, Appendix D) Stand, Cab Maintenance (Item 4, Appendix D) Cab Front Support Spanner Socket (Item 3, Appendix D) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Socket Set, Socket Wrench (Item 51, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Crowfoot Attachment, Socket Wrench (TM 9-2320-365- 20) Crowfoot Attachment, Socket Wrench (TM 9-2320-365- 20) Socket Wrench Attachment, Screwdriver (Item 54, Appendix 4) Materials/Parts Sealing Compound (Item 75, Appendix C) Oil, Paraffin and Mineral (Item 54, Appendix C) Tape, Antiseizing (Item 83, Appendix C) Rubber Sheeting (Item 63, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Ties, Cable, Plastic (Item 89, Appendix C) Lockwasher (2) (Item 103, Appendix F) Lockwasher (Item 102, Appendix F) Lockwasher (2) (Item 101, Appendix F) Nut, Plain, Hex (Item 121, Appendix F) Pin, Cotter (Item 229, Appendix F) Nut, Self-Locking (Item 140, Appendix F) Nut, Self-Locking (Item 141, Appendix F) Washer, Spring Tension (Item 305, Appendix F) Pin, Cotter (Item 228, Appendix F) Packing, Preformed (Item 214, Appendix F) Nut, Plain, Hex. (2) (Item 119, Appendix F) Bushing, Sleeve (Item 21, Appendix F) Bushing, Sleeve (Item 22, Appendix F) Bushing, Non-metallic (Item 20, Appendix F) Nut, Self-locking (Item 136/145, Appendix F) Washer, Flat (Item 297.1, Appendix F) Pin, Straight Headed (Item 231.1, Appendix F) Pin, Cotter (Item 226.1, Appendix F) Personnel Required (3) Change 1 15-57

Privacy Statement
Press Release
Contact