TM 9-2320-365-34-215-5. M1081 CAB REAR WALL REPLACEMENT/REPAIR (CONT)CAUTIONUse care when installing captive screws.Failure to comply may result in damage toequipment.NOTE• Lubricate all captive screws prior to installation.• All captive screws are installed the same way.One captive screw shown.• Tighten nut until captive screw is seated.(9) Install captive screw (15) in cab rear wall (2) with washerand nut.(10) Remove nut and washer from captive screw (15).(11) Perform steps (9) and (10) on remaining nine captivescrews.(12) Position five centering cups (16) on cab rear wall (2) withfive screws (17).(13) Tighten five screws (17) to 62-124 lb-in. (7-14 N·m).NOTE• Perform steps (14) through (20) on left and rightsides of cab rear wall. Right side shown.• Tighten nut until captive screw is seated.(14) Install captive screw (18) in cab rear wall (2) with washerand nut.(15) Remove nut and washer from captive screw (18).(16) Install seal (19) on cab rear wall (2).(17) Position centering cup (20) on cab rear wall (2) withscrew (21).(18) Tighten screw (21) to 62-124 lb-in. (7-14 N·m).(19) Position friction catch (22) on cab rear wall (2) with twoscrews (23).(20) Tighten two screws (23) to 62-124 lb-in. (7-14 N·m).15-102 Change 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
