TM 9-2320-365-34-2
NOTE
Perform step (50.1) on vehicles equipped
with transmission oil cooler hoses.
(50.1) Position gasket (60), flywheel cover (58), and
transmission oil cooler hose bracket (60.1) on flywheel
housing (13.3) with four washers (57) and screws (56).
(50.2) Tighten four screws (56) to 16-25 lb-ft (21-35 N·m).
(50.3) Turn engine speed sensor (13.2) to the right in flywheel
housing (13.3) until engine speed sensor contacts
flywheel.
(50.4) Turn engine speed sensor (13.2) to the left out of
flywheel housing (13.3) two full turns.
(50.5) Tighten jam nut (13.1) on engine speed sensor (13.2).
Change 1
3-42.1/(3-42.2 Blank)
