TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL
This task covers:
a. Installation
b. Removal
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Roof hatch, removed (All models except M1081)
(TM 9-2320-365-20-4)
Roof hatch, removed (M1081) (TM 9-2320-365-20-
4)
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Drill, Electric, Portable (Item 18, Appendix B)
Drill Set, Twist (Item 17, Appendix B)
Blade, Hand, Hacksaw, (Item 4, Appendix B)
Frame, Hand, Hacksaw, (Item 20, Appendix B)
Wrench, Torque, 0-175 lb ft (Item 80,
Appendix B)
Tap and Die Set, (Item 47, Appendix B)
Square Combination (Item 57, Appendix B)
Wrench Set, Crowfoot Ratcheting, (TM 9-2320-365-
20)
Tool Kit, Blind Rivet, (Item 66, Appendix B)
Wrench, Torque 0-200 lb-in. (Item 81, Appendix B)
Machine Gun Ring Drill Stop (Item 9, Appendix D)
Tools and Special Tools (Cont)
Machine Gun Ring Wooden Support (3) (Item 10,
Appendix D)
Screwdriver Attachment, Socket Wrench (Item 47.1,
TM 9-2320-365-20 Appendix B)
Dispenser, Sealant (Item 13.1, TM 9-2320-366-20
Appendix B)
Materials/Parts
Sealing Compound (Item 70, Appendix C)
Sealant, Adhesive (Item 66, Appendix C)
Seal (Item 255, Appendix F)
Panel, Defroster (Item 218, Appendix F)
Seal, Urethane Foam (102.25 in. 259.7 cm) (Item
273, Appendix F)
Seal, Urethane Foam (86.75 in. 220.3 cm) (Item
272, Appendix F)
Rubber Strip (Item 251, Appendix F)
Black Polysufide Sealant (Item 75.1, Appendix C)
Personnel Required
(2)
a. Installation.
(1) Remove four screws (1) and washers (2) from center
seat side brackets (3).
NOTE
Store center seat, mount, screws, and
washers for future installation.
(2) Remove center seat (4) from vehicle.
(3) Remove four screws (5) and washers (6) from center
seat mount (7).
(4) Remove center seat mount (7) from vehicle.
19-2
Change 1
