TM 9-2320-365-10
3-10. M1081 AIR DROP PREPARATION (CONT)
e. Slide Assembly Installation.
NOTE
Steps (1) through (11) require
the aid of an assistant.
(1) Remove wing nut (1) and retaining bar
(2) from cover plate assembly (3).
(2) Remove cover plate assembly (3) from
slide assembly receptacle (4).
(3) Assemble retaining bar (2) and wing
nut (1) on threaded rod of cover plate
assembly (3). Stow in tool box.
(4) Remove safety pin (5) from large pin
(6) of slide assembly (7).
(5) Remove safety pin (8) from small pin
(9) of slide assembly (7).
(6) Remove small pin (9) from slide
assembly (7).
(7) Remove large pin (6) while holding
slide assembly (7).
(8)
Align small hole of slide assembly (7)
with middle hole of slide assembly
receptacle (4).
(9) Install small pin (9) in slide assembly
(7) and slide assembly receptacle (4).
(10) Install large pin (6) in slide assembly
(7) and slide assembly receptacle (4).
(11) Install two safety pins (5 and 8) in pins
(6 and 9).
3-124
Change 1
