1. WARNING       CAUTION       Read WARNING and CAUTION on following page.            TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION                 KNOWN INFO              Replace transmission external wiring harness (para 6-7). YES TM 9-2320-365-34-1 2-546          Change 1 START NO        POSSIBLE PROBLEMS        Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty N solenoid. Faulty WTEC II TEPSS. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. Is continuity present from connector P119-K to external wiring harness 24-pin connector pin H3? If continuity is not present, transmission external wiring harness is faulty. c44. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN         CODE 43 SUB CODE 26 (PRIOR TO SERIAL NUMBER 6510032369) INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required     (2) References     TM 9-4910-571-12&P