TM 9-2320-365-34-2
(4) Disconnect oil tube (8) from 90-degree fitting (9).
(5) Remove oil tube (8) from fitting (10).
(6) Remove preformed packing (11) from 90-degree fitting
(9). Discard preformed packing.
(7) Remove preformed packing (12) from fitting (10).
Discard preformed packing.
(8) Remove 14 bolts (13) and washers (14) from cylinder
head (7).
(9) Remove six bolts (15) from cylinder head (7).
WARNING
Cylinder head weighs approximately 150 lbs
(68 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may
result in injury to personnel or damage to
equipment.
CAUTION
Keep cylinder head level during removal to
prevent damage to dowels. Failure to comply
may result in damage to equipment.
NOTE
Step (10) requires the aid of an assistant.
(10) Remove cylinder head (7) and gasket (16) from cylinder
block (17). Discard gasket.
3-69
