TM 9-2320-365-34-2
3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT)
(21) Install preformed packing (24) on 90-degree fitting (6).
(22) Install fuel tube (25) on 90-degree fitting (6).
(23) Install clamp (26), washer (27), and screw (28) on
cylinder head (4).
d. Follow-On Maintenance.
(1) Install exhaust manifold (para 3-23).
(2) Install thermostat housing (TM 9-2320-365-20-3).
(3) Install fuel injectors (para 4-2).
(4) Install fuel control linkage (para 4-7).
(5) Install rocker arms and pushrods (para 3-12).
(6) Install orifice tube assembly (TM 9-2320-365-20-3).
(7) Install fuel filter base (TM 9-2320-365-20-3).
(8) Install inlet manifold (para 3-22).
(9) Fill radiator with coolant (TM 9-2320-365-20).
(10) Prime vehicle fuel system (TM 9-2320-365-10).
(11) Lower cab (TM 9-2320-365-10).
(12) Start engine (TM 9-2320-365-10).
(13) Check oil pressure (TM 9-2320-365-10).
(14) Check for excessive smoke from tailpipe.
(15) Ensure engine runs smoothly.
(16) Raise cab (TM 9-2320-365-10).
(17) Check for evidence of oil or coolant leakage around
cylinder head.
(18) Lower cab (TM 9-2320-365-10).
(19) Shut down engine (TM 9-2320-365-10).
End of Task.
3-74
