• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure  D-6.   Cab  Maintenance  Stand  Base  Fabrication
Figure  D-8.   Cab  Maintenance  Stand  Brace  to  Base  Assembly

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  1081    1082    1083    1084    1085  1086  1087    1088    1089    1090    1091  
TM 9-2320-365-34-2 D-4.   CAB MAINTENANCE STAND (CONT) Figure  D-7.   Cab  Maintenance  Stand  Brace  Bracket  Locations h.   Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (9.6 mm) holes through 4 support braces  (4)  and  through  2  supports  (6)  as  shown  in  Figure  D-7.    Cab  Maintenance  Stand  Brace  Bracket Locations. i. Make 2 B braces by securing to each end of support (6), braces (4) and straight brackets (10) using 16 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15). j. Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (9.6 mm) holes through 2 support braces  (5)  and  through  1  support  (6)  as  shown  in  Figure  D-7.    Cab  Maintenance  Stand  Brace  Bracket Locations. k.    Make C brace by securing to each end of support (6), brace (5) and straight brackets (10) using 8 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15). D-12







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.