• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
EXHAUST MANIFOLD REPLACEMENT
Follow-On Maintenance - TM-9-2320-365-34-2_180

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  135    136    137    138    139  140  141    142    143    144    145  
TM 9-2320-365-34-2 3-23.   EXHAUST MANIFOLD REPLACEMENT (CONT) b.   Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing.   Keep away   from   open   fire   and   use   in   a   well- ventilated   area. If   adhesive,   solvent   or sealing compound gets on skin or clothing, wash   immediately   with   soap   and   water. Failure  to  comply  may  result  in  injury  to personnel. (1)  Apply antiseize compound to threads of 12 screws (1). (2)  Position exhaust manifold (2), gasket (3), and retaining ring (4) on cylinder head (5) with two screws (1). (3)  Position two gaskets (6), five retaining rings (7), and 10 screws (1) on exhaust manifold (2). (4)  Tighten   12   screws   (1)   to   24-48   lb-in.   (3-5   N·m)   in sequence shown. (5)  Re-tighten  12  screws  (1)  to  29-37  lb-ft  (39-50  N·m)  in sequence shown. (6)  Bend tabs on five retaining rings (7) and retaining ring (4). 3-134







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.