TM 9-2320-365-34-2
4-5. FUEL TIMING CHECKS (CONT)
(5) Remove bolt and timing fixture from inlet manifold (4).
(6) Remove timing bolt (3) from timing hole on front of
flywheel housing (2).
NOTE
Use bolt on front of alternator to rotate
crankshaft and timing bolt installation.
(7) Rotate crankshaft to the right one complete revolution.
CAUTION
Crankshaft must always be rotated to right to
align timing bolt with flywheel. Do not rotate
crankshaft to left for alignment.
Failure to
comply may result in damage to equipment.
NOTE
If timing bolt alignment is not obtained on first
revolution, crankshaft must be rotated two
complete revolutions before installing timing bolt.
(8) Install timing bolt (3) in timing hole on front of flywheel
housing (2).
(9) Perform steps (4) through (8) on remaining injectors on
this stroke.
(10) Remove timing bolt (3) from timing hole on front of
flywheel housing (2).
(11) Install plug (1) in timing hole on front of flywheel housing
(2).
4-22
