TM 9-2320-365-34-2
(3) Position two clamps (4) on cab rear wall (2) with four
screws (5), washers (6), and nuts (7).
(4) Position four screws (8) in two clamps (4).
(5) Tighten four screws (8) and nuts (7) to 35-44 lb-in. (4-5
N·m).
(6) Position clamp (9) on cab rear wall (2) with four screws
(10).
(7) Tighten four screws (10) to 35-44 lb-in. (4-5 N·m).
(9) Install insulation panels (11 through 16) on cab rear wall
(2).
15-101
