TM 9-2320-365-34-2
(5) Fasten three latches (9) on cab side wall (6).
(6) Tighten 10 screws (4) to 22-28 lb-ft (30-38 N·m).
(7) Tighten 10 screws (10) to 22-28 lb-ft (30-38 N·m).
(8) Position center seatbelt mounting bracket (11) on cab
rear wall (1) with two spacers (12), washer (13), and
screw (14).
(9) Tighten screw (14) to 30-35 lb-ft (41-47 N·m).
(10) Install cover (15) on screw (14).
(11) Position three clamps (16) on cab rear wall (1) with three
washers (17) and screws (18).
(12) Tighten three screws (18) to 27-35 lb-in. (3-4 N·m).
15-105
