TM 9-2320-365-34-2
16-3. 11K SELF-RECOVERY WINCH (SRW) CARTRIDGE/COUNTERBALANCE
VALVE REPLACEMENT (CONT)
c. Counterbalance Valve Removal.
CAUTION
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(1) Disconnect two hydraulic hoses (1) from 90-degree
fittings (2).
(2) Remove four screws (3) and screw (4) from
counterbalance valve (5).
(3) Remove counterbalance valve (5) from hydraulic motor
(6).
(4) Remove preformed packing (7) from counterbalance
valve (5). Discard preformed packing.
(5) Remove two 90-degree fittings (2) from counterbalance
valve (5).
(6) Remove two preformed packings (8) from 90-degree
fittings (2). Discard preformed packings.
(7) Remove two preformed packings (9) from hydraulic
motor (6). Discard preformed packings.
16-20
Change 1