TM 9-2320-365-34-2(87) Remove self-locking nut (107), washer (108), andinsulator washer (109) from alternator (5).(88) Route terminal lug TL6 (94) through boot on TL2 (96).CAUTIONInsulator washer must be installed with flatside up. Failure to comply may result indamage to equipment.(89) Position 24v terminal lugs TL2 (96) and TL6 (94) onalternator (5) with insulator washer (109), washer (108),and self-locking nut (107).(90) Tighten self-locking nut (107) to 40 lb-in. (5 N·m).(91) Position boot on terminal lugs TL6 (94) and TL2 (96).CAUTIONInsulator washer must be installed with flatside up. Failure to comply may result indamage to equipment.(92) Remove self-locking nut (110), washer (111), andinsulator washer (112) from alternator (5).(93) Position 12v terminal lug TL60 (95) on alternator (5) withinsulator washer (112), washer (111), and self-lockingnut (110).(94) Tighten self-locking nut (110) to 40 lb-in. (5 N·m).(95) Position boot on terminal lug TL60 (95).Change 1 3-47
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business