TM 9-2320-365-34-2
19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT)
(10) Position top platform (8) in cab floor (9) with two washers
(15) and screws (16) in clinch nuts (14).
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
NOTE
Install center seat in folded and raised
position with seat rails in forward position.
(11) Apply sealing compound to threads of two screws (19).
(12) Position center seat (17) on top platform (8).
NOTE
Flat sides of screw will be in line with seat
tracks.
(13) Position two washers (18) and screws (19) in seat mount
(20).
(14) Slide center seat (17) fully forward.
(15) Fold center seat (17) down.
19-4
Change 1
