TM 9-2320-365-34-2
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(16) Apply sealing compound to threads of two screws (22).
(17) Position two washers (21) and screws (22) in seat mount
(20).
NOTE
When tightening screws, flat sides of screws
are to be in line with track sides.
(18) Tighten two screws (16) to 71-89 lb-in. (8-10 N·m).
(18.1) Tighten two screws (19 and 22) to 14-18 lb-ft (19-25
N·m).
(19) Install two support brackets (23) on lower platform legs
(24) with straight pins (25).
(20) Install four cotter pins (26) in two straight pins (25).
Change 1
19-5
