TM 9-2320-365-10
2-21. VEHICLE OPERATION (CONT)
CAUTION
Engine rpm must be at idle (750 rpm) prior to selecting any forward or
reverse gear. Failure to comply may result in damage to equipment.
Do not allow vehicle to coast in N (Neutral). Failure to comply may result
in damage to equipment.
NOTE
When transmission is operating normally, left side of LED display will indicate
selected gear and right side of LED display will indicate current operating
gear.
(2) Select desired travel direction (D for Drive or R for Reverse) on WTEC II TEPSS (1)
or WTEC III TPSS (1).
(3) Push in SYSTEM PARK control (2).
2-154