TM 9-2320-365-10 Table 3-4.   General Cleaning Instructions (Cont) Cleaning Materials Used to Remove Surface Oil/Grease Salt/Mud/ Dust/Debris Surface Rust/Corrosion Cab Interior (Material) Saddle soap, warm water, soft brush, and dry rags. Soft brush, soapy warm water, and damp or dry rags. Not applicable. Frame Grease-cleaning compound rinsed with running water and rags. High pressure water, soapy warm water, wire brush, and damp or dry rags. Corrosion-removing compound, bristle brush, dry rags, and lubricating oil.* Starting Motor Mixed solution, 1 part grease-cleaning compound, 4 parts dry cleaning solvent, and rags. Soapy warm water, soft wire brush, and damp or dry rags. Bristle brush, warm soapy water, and dry rags. Engine/ Transmission Mixed solution, 1 part grease-cleaning compound, 4 parts dry cleaning solvent, and rags. High pressure water, soapy warm water, soft wire brush, and damp or dry rags. Bristle brush, warm soapy water, and dry rags. Glass Glass cleaning solution and clean dry rags. Glass cleaning solution and clean, dry rags. Not applicable. Radiator Not applicable. Low pressure water, air, soapy warm water, and damp or dry rags. Not applicable. Rubber Insulation Damp or dry rags. Damp or dry rags. Not applicable. Tires Soapy water and bristle brush. High pressure water and bristle brush. Not applicable. Cable Cleaning compound and wire brush. Wire brush. Wire brush and lubricating oil.^* *  After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent continued rust. 3-95