TM 9-2320-365-10
(3)
Remove large pin (2) from slide
assembly (5).
(4) Lower slide assembly (5) in slide
assembly receptacle (4).
(5) Install small pin (3) in bottom hole of
slide assembly receptacle (4) and slide
assembly (5).
(6) Install large pin (2) in large hole of slide
assembly receptacle (4).
(7) Install two safety pins (1) in large pin
(2) and small pin (3).
(8) Install cover plate assembly (6) in slide
assembly receptacle (4) in cargo bed
(7).
(9) Install retaining bar (8) on rod of cover
plate assembly (6).
(10) Install wing nut (9) on rod of cover
plate assembly (6).
Change 1
3-145
