MAIN VALVE BODY SPRING COMPRESSION TOOL

MACHINE GUN RING DRILL STOP - TM-9-2320-365-34-1_1131

SPANNER SOCKET TOOL - TM-9-2320-365-34-1_1133

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
1085

TM 9-2320-365-34-1 D-11. MAIN VALVE BODY SPRING COMPRESSION TOOL Make the main valve body spring compression tool from steel pipe according to the following instructions. Refer to the parts list and figure for details. Material Description Size Qty Pipe, Steel, 1/2 inch ID 1/2 in. (12.7 mm) ID X 1.50 in. (38 mm) 1 Figure D-21. Main Valve Body Spring Compression Tool a. All dimensions are in inches (millimeters). b. De-burr and remove sharp edges inside and outside compression tool surface. c. Tolerance: 1 place⁺/- .06 2 place⁺/- .03 3 place⁺/- .005 angles⁺/- 2 unless otherwise specified. d. Surface texture: 125 unless otherwise specified. D-12. MARKING SLEEVE FABRICATION Fabricate marking sleeves according to the following information. a. Cut from bulk sleeve material 12414663 FP-301-12.7, 2 in. (51 mm). b. All dimensions are in inches (millimeters). c. Identify by applying the following applicable numbers to the sleeve according to MIL-STD 130. CAGE CODE PART NUMBER D-26

Privacy Statement
Press Release
Contact