TM 9-2320-365-34-1
D-6. ENGINE STAND BRACKET ASSEMBLY (CONT)
Item
Part Number
Material Description
Size
Qty
2
12419144-002
Plate, Steel, ASTM A-36
20.62 in. (523.7 mm) x 7.25 in. (184.1
mm) x 0.312 in. (7.9 mm) thick
1
Figure D-17. Engine Stand Bracket Rear Plate
a. All dimensions are in inches (millimeters).
b. Fabricate (2) from ASTM A-36 steel plate.
c. Drill 0.563 in. (14.3 mm) diameter hole through 2 places in rear plate as shown in Figure D-17. Engine Stand
Bracket Rear Plate.
d. Drill 0.438 in. (11.1 mm) diameter hole through 4 places in rear plate as shown in Figure D-17. Engine Stand
Bracket Rear Plate.
e. Cut or mill between 0.438 in. (11.1 mm) diameter holes as shown in Figure D-17. Engine Stand Bracket Rear
Plate.
f. De-burr and remove all sharp edges.
D-22 Change 1
