CONTINUITY TEST - TM-9-2320-365-34-1

WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 43 SUB CODE 21 (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY) (CONT)

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
551

Change 1 2-505 TM 9-2320-365-34-1 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to adapter cable 31-pin connector pin F. (3) Connect negative (-) probe of multimeter to adapter cable 24-pin connector pin D2 and note reading on multimeter. (4) If continuity is not present, replace transmission adapter cable assembly (para 6-8). (5) Connect positive (+) probe of multimeter to adapter cable 31-pin connector pin F. (6) Connect negative (-) probe of multimeter to all other pins in adapter cable 31-pin connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transmission adapter cable assembly is shorted; replace transmission adapter cable assembly (para 6-8). (9) Connect external wiring harness 31-pin connector to adapter cable 31-pin connector.

Privacy Statement
Press Release
Contact