WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     1. TM 9-2320-365-34-1 2-642          Change 1 START INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Is continuity present from connector P119-h to connector P67-W? If continuity is not present, transmission external wiring harness is faulty. YES Replace transmission external wiring harness (para 6-7). NO        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. WTEC III transmission ECU OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 pressure switch. Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required   (2) References   TM 9-4910-571-12&P c53. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE         32 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER)