CONTINUITY TEST - TM-9-2320-365-34-1

WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 32 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER) (CONT

WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 32 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
699

Change 1 2-649 TM 9-2320-365-34-1 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector pin X. (3) Connect negative (-) probe of multimeter to internal wiring harness connector C3 pin 3A and note reading on multimeter. (4) If continuity is not present, replace transmission internal wiring harness (para 7-13). (5) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector pin X. (6) Connect negative (-) probe of multimeter to all other pins in internal wiring harness 31-pin connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transmission internal wiring harness is shorted; replace transmission internal wiring harness (para 7-13). (9) If continuity is present in step (3) and absent in steps (6) and (7), replace C3 pressure switch (para 7-8). (10) Connect transmission internal wiring harness connector C3 to C3 pressure switch connector. (11) Install control valve module (para 7-10). (12) Connect batteries (TM 9-2320-365-20-3).

Privacy Statement
Press Release
Contact