TM 9-2320-365-34-1
Change 1 2-837
RESISTANCE TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter
to pin A of H solenoid connector.
(3) Connect negative (-) probe of multimeter
to pin B of H solenoid connector and note
reading on multimeter.
(4) If resistance is less than 2.5 ohms or
greater than 5.0 ohms, replace H solenoid
(para 8-2).
(5) If resistance is between 2.5-5.0 ohms,
replace WTEC III transmission ECU
(TM 9-2320-365-20-3).
(6) Connect transfer case wiring harness
connector H to H solenoid connector.
(7) Install valve body cover on transfer case
(para 8-2).
(8) Connect connector P71 to transfer case
connector.
(9) Connect batteries (TM 9-2320-365-20-3).