TM 9-2320-365-34-2WARNINGUse care when removing retaining rings.Retaining rings are under tension and canact as projectiles when released. Failureto comply may result in injury topersonnel.(5) Apply pressure on spring retainer (8) in C6 clutchhousing (3).(6) Remove retaining ring (9) from C6 clutch housing (3).(7) Release pressure on spring retainer (8) in C6 clutchhousing (3).(8) Remove spring retainer (8) from C6 clutch housing (3).(9) Remove piston (10) and seal rings (11 and 12) from C6clutch housing (3). Discard seal rings.(10) Remove sleeve (13) from C6 clutch housing (3).(11) Remove bushing (14) from sleeve (13).b. Cleaning/Inspection.WARNINGDry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles andgloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and donot breathe vapors. Keep away from heat or flame. Never smoke when using solvent; theflashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C).Failure to comply may result in serious injury or death to personnel.If personnel become dizzy while using cleaning solvent, immediately get fresh air andmedical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If drycleaning solvent contacts eyes, immediately flush eyes with water and get immediate medicalattention. Failure to comply may result in injury to personnel.(1) Clean all metal parts with dry cleaning solvent.21-67
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
