TM 9-2320-365-34-2
22-3. TRANSFER CASE MODULE REPAIR
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transfer case module removed (para 22-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Holding Bar, Pinion (TM 9-2320-365-20)
Wrench, Impact, Electric (Item 77, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque, 0-600 lb ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Adapter, Socket Wrench (Item 2, Appendix B)
Tools and Special Tools (Cont)
Puller Kit, Universal (Item 44, Appendix B)
Socket, Socket Wrench (TM 9-2320-365-20)
Materials/Parts
Gasket (Item 34, Appendix F)
Gasket (2) (Item 42, Appendix F)
Oil, Lubricating (Item 44, Appendix C)
Personnel Required
(2)
a. Disassembly.
(1) Position transfer case module (1) with C6 clutch housing
(2) facing up.
(2) Remove 15 screws (3), two screws (4), C6 clutch
housing (2), and gasket (5) from transfer case module
(1). Discard gasket.
(3) Remove nut (6), washer (7), and yoke (8) from rear
output shaft (9).
22-6
Change 1
