TM 9-2320-365-34-2
22-4. TRANSFER CASE HOUSING REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Bearing Preload Adjustment
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transfer case module disassembled (para 22-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Caliper, Vernier (Item 8, Appendix B)
Indicator, Dial (Item 30, Appendix B)
Hammer, Soft Head (Item 28, Appendix B)
Inserter, Bearing and Bushing (TM 9-2320-365-20)
Inserter and Remover, Spring (TM 9-2320-365-20)
Puller Kit, Universal (Item 44, Appendix B)
Puller Kit, Universal (Item 43, Appendix B)
Press, Arbor, Hand Operated (Item 41, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Gasket (Item 41, Appendix F)
Gasket (2) (Item 40, Appendix F)
Seal, Washer (2) (Item 301, Appendix F)
Gasket (Item 44, Appendix F)
Gasket (Item 39, Appendix F)
Packing, Preformed (Item 169, Appendix F)
Packing, Preformed (3) (Item 170, Appendix F)
Oil, Lubricating (Item 36, Appendix C)
Rag, Wiping (Item 59, Appendix C)
Solvent, Dry Cleaning (Item 81, Appendix C)
Personnel Required
(2)
a. Disassembly.
(1) Remove eight screws (1) from C6 bearing retainer (2).
(2) Remove C6 bearing retainer (2) from transfer case cover
(3).
(3) Remove 10 screws (4), access cover (5), and gasket (6)
from transfer case cover (3). Discard gasket.
22-10
