TM 9-2320-365-34-2
22-4. TRANSFER CASE HOUSING REPAIR (CONT)
(33) Rotate transfer case housing (2) until transfer case cover
(9) is facing up.
(34) Position rear output bearing retainer (43) on transfer
case cover (9) with eight bolts (44).
(35) Tighten eight bolts (44) to 44-55 lb-ft (60-75 N·m)
(36) Position output speed sensor (45) in transfer case cover
(9) with two screws (46).
(37) Tighten two screws (46) to 7-10 lb-ft (9-14 N·m).
(38) Position control valve (47) in transfer case cover (9) with
six screws (48).
(39) Tighten six screws (48) to 7-10 lb-ft (9-14 N·m).
(40) Connect wiring harness (24) to output speed sensor (45)
and control valve (47).
(41) Position gasket (49) and access cover (50) on transfer
case cover (9) with 10 bolts (51).
(42) Tighten 10 bolts (51) to 18-21 lb-ft (24-29 N·m)
(43) Position C6 bearing retainer (52) on transfer case cover
(9) with eight bolts (53).
(44) Tighten eight bolts (53) to 44-55 lb-ft (60-75 N·m)
22-20
