TM 9-2320-365-34-2
3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Inlet manifold removed (para 3-22).
Fuel filter base removed (TM 9-2320-365-20-3).
Orifice tube assembly removed (TM 2320-365-
20-3).
Rocker arms and push rods removed (para 3-
12).
Fuel control linkage removed (para 4-7).
Fuel injectors removed (para 4-2).
Thermostat housing removed (TM 9-2320-365-
20-3).
Exhaust manifold removed (para 3-23).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix
B)
Goggles, Industrial (Item 25, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix
B)
Tools and Special Tools (Cont)
Socket Wrench Attachment, Screwdriver (TM 9-2320-
365-20)
Socket, Socket Wrench (Item 56, Appendix B)
Adapter, Socket (Item 1, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Materials/Parts
Packing, Preformed (Item 204, Appendix F)
Packing, Preformed (2) (Item 197, Appendix F)
Gasket (Item 53, Appendix F)
Packing, Preformed (Item 190, Appendix F)
Packing, Performed (Item 191, Appendix F)
Packing, Performed (Item 182, Appendix F)
Packing, Preformed (Item 199, Appendix F)
Rag, Wiping (Item 57, Appendix C)
Ties, Cable Plastic (Item 87, Appendix C)
Lubricating Oil, Engine (Item 43, Appendix C)
Solvent, Dry Cleaning (Item 79, Appendix C)
Personnel Required
(2)
a. Removal.
(1) Disconnect fuel tube (1) from 90-degree fitting (2).
(2) Remove preformed packing (3) from 90-degree fitting (2).
Discard preformed packing.
(3) Remove screw (4), washer (5), clamp (6), and fuel tube
(1) from cylinder head (7).
3-68
