TM 9-2320-365-34-2
3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT)
(11) Remove five screws (18), washers (19), and rear lifting
eye bracket (20) from cylinder head (7).
(12) Remove four screws (21), washers (22), and front lifting
eye bracket (23) from cylinder head (7).
(13) Remove 90-degree fitting (9) from cylinder head (7).
(14) Remove preformed packing (24) from 90-degree fitting
(9). Discard preformed packing.
(15) Remove 90-degree fitting (2) from cylinder head (7).
(16) Remove preformed packing (25) from 90-degree fitting
(2). Discard preformed packing.
(17) Remove adapter sleeve (26) and preformed packing (27)
from cylinder head (7). Discard preformed packing.
(18) Remove preformed packing (28) from adapter sleeve
(26). Discard preformed packing.
3-70
