TM 9-2320-365-34-2
3-7. PULLEY DAMPER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance.
INITIAL SETUP
Equipment Conditions
Engine fan and fan clutch removed (TM 9-2320-365-
20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Tools and Special Tools (Cont)
Gage, Belt Tension (TM 9-2320-365-20)
Adapter, Socket Wrench (Item 3, Appendix B)
Socket Wrench Attachment, Screwdriver (Item
54, Appendix B)
Personnel Required
(2)
a. Removal.
(1) Loosen two screws (1) on idler pulley (2).
(2) Remove two alternator belts (3) from engine.
CAUTION
Damper is easily damaged and must be
handled carefully. Failure to comply may
result in damage to equipment.
(3) Remove eight screws (4), washers (5), adapter (6),
damper (7), and pulley (8) from crankshaft pulley (9).
3-75
