TM 9-2320-365-34-2 D-31.   PNEUMATIC HOSE ASSEMBLY FABRICATION Make pneumatic hose assemblies by cutting hose lengths from bulk hose using a fine-toothed hacksaw or suitable cutting device and assembling to end fittings. The following hose table list the assemblies and the components from which the assemblies are made. Hose  Assembly Part  Number Bulk  Hose Part  Number Cutoff  Length in  in.  (mm) Fitting  A Fitting  B 12420062-002 4720-00-143-9390 97.1 (2466) 6-6 3014xx 5/8-18 6-6 3001xx 5/8-18 12420062-003 4720-00-143-9390 48.7 (1237) 6-6 3014xx 5/8-18 6-6 3001xx 5/8-18 12420062-004 J30R2Type1 1/2 ID 65. (1651) 8-8 3014xx 3/4-16 8-8 3001xx 3/4-16 12420062-005 J30R2Type1 1/2 ID 57. (1448) 8-8 3014xx 3/4-16 8-8 3001xx 3/4-16 12420064-001 4720-00-912-3092 25. (635) 4-4 3001xx 7/16-20 4-4 3001xx 7/16-20 12420064-002 4720-00-912-3092 30. (762) 4-4 3001xx 7/16-20 4-4 3001xx 7/16-20 12420064-007 4720-00-143-9390 15. (378) 6-6 3002xx 5/8-18 6-6 3002xx 5/8-18 12420064-009 4720-00-143-9390 14. (356) 6-6 3002xx 5/8-18 6-6 3001xx 5/8-18 12414694-X508 4720-00-095-1011 20. (508) 300166 5/8-18 UNF 150166 3/8 NPTF 12414694-X558 4720-00-095-1011 22. (558) 300166 5/8-18 UNF 150166 3/8 NPTF D-32.   NON-METALLIC ELECTRICAL CABLE CONDUIT FABRICATION Make conduit to cover electrical cables described on 1241638 from bulk tube stock listed in Table D-2. Non-Metallic Electrical Cable Conduit Lengths. Use a fine-toothed hacksaw or suitable cutting device and cut hose/tube to required length. Table  D-2.  Non-Metallic  Electrical  Cable  Conduit  Lengths Tube  Part  Number Bulk  Tube  Part  Number Cut  Length in. mm 12416381P1 49008 8.9 226 12416381P10 49008 17.8 452 12416381P11 49008 29.9 759 12416381P12 49008 33.0 838 12416381P13 49008 13.9 353 12416381P14 49008 4.0 102 12416381P15 49008 17.4 442 12416381P16 49008 3.2 81 12416381P17 49008 4.5 114 12416381P2 49008 16.2 411 12416381P20 27413 32.8 833 12416381P21 27413 9.2 234 12416381P22 27413 8.0 203 12416381P23 27413 23.3 592 12416381P26 49008 2.5 64 12416381P3 27413 7.3 185 D-58