TM 9-2320-365-34-2
3-20. AIR INLET ELBOW REPLACEMENT (CONT)
b. Installation.
NOTE
Perform steps (1) and (2) on vehicle serial
numbers 3092 and higher serial numbers,
and vehicle serial numbers 0001 through
3091 that have had the lower charge air tube
bracket replaced.
(1) Position gasket (1) and air inlet elbow (2) on inlet
manifold cover (3) with four washers (4), and bolts (5).
(2) Tighten four bolts (5) to 15-25 lb-ft (20-34 N·m).
NOTE
Perform steps (3) and (4) on vehicle serial
numbers 0001 through 3091 that have not
had the lower charge air tube bracket
replaced.
(3) Position air inlet elbow (2) on inlet manifold cover (3)
with five washers (6) and bolts (7).
(4) Position clamp (8) on air inlet elbow (2) with washer (9)
and bolt (10).
(5) Tighten five bolts (7) and bolt (10) to 15-25 lb-ft (20-34
N·m).
3-124