TM 9-2320-365-34-2
3-22. INLET MANIFOLD REPLACEMENT (CONT)
b. Installation.
(1) Position gasket (1) on cylinder head (2).
(2) Position inlet manifold (3) on cylinder head (2).
(3) Position six washers (4) and bolts (5) on inlet manifold
(3).
(4) Position 10 washers (6) and bolts (7) on inlet manifold
(3).
(5) Position washer (8) and bolt (9) in inlet manifold (3).
(6) Position fuel/water separator bracket (10) on inlet
manifold (3) with three washers (11) and bolts (12).
(7) Position washer (13) and bolt (14) in fuel/water separator
bracket (10).
(8) Tighten bolt (14) to 37-51 lb-ft (50-69 N·m).
3-130
