TM 9-2320-365-34-2
4-3. FUEL INJECTOR SYNCHRONIZATION
This task covers:
a. Fuel Injector Synchronization
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Valve cover removed (TM 9-2320-365-20-2).
Fuel shutoff solenoid removed (para 6-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20)
Tools and Special Tools (Cont)
Wrench, Torque, 0-60 N·m (Item 84, Appendix B)
Hammer, Hand Soft Head (Item 28, Appendix B)
Materials/Parts
Lubricating Oil, Engine (Item 48, Appendix C)
Personnel Required
(2)
a. Fuel Injector Synchronization.
CAUTION
• This task must be performed when any fuel
injector is replaced. If No. 1 fuel injector is
replaced,
all
injectors
must
be
synchronized. Failure to comply may result
in damage to equipment.
• Hold rocker arm assembly level when
removing
from
engine
to
prevent
disassembly. Failure to comply may result
in damage to equipment.
(1) Remove four bolts (1) from rocker arm assembly (2).
(2) Remove rocker arm assembly (2) from cylinder head (3).
(3) Apply a small amount of clean lubricating oil to top of
No. 1 fuel injector (4).
4-5
