TM 9-2320-365-34-2
4-3. FUEL INJECTOR SYNCHRONIZATION (CONT)
(33) Remove injector spring compressor from No. 1 fuel
injector (4) and injector being synchronized.
(34) Install three pushrods (5) in cylinder head (3).
CAUTION
Hold rocker arm assembly level when
installing on engine to prevent disassembly.
Failure to comply may result in damage to
equipment.
(35) Install rocker arm assembly (2) on cylinder head (3).
(36) Position four bolts (1) in rocker arm assembly (2).
(37) Tighten four bolts (1) to 180-300 lb-in. (20-34 N·m).
(38) Perform steps (33) through (37) on all injectors
synchronized.
4-10
