TM 9-2320-365-34-2
4-6. TURBOCHARGER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Compound, Antiseize (Item 13, Appendix C)
Materials/Parts (Cont)
Nut, Self-Locking (2) (Item 146, Appendix F)
Lockwasher (2) (Item 96, Appendix F)
Gasket (Item 48, Appendix F)
Packing, Preformed (Item 204, Appendix F)
Gasket (Item 60, Appendix F)
Ring, Seal (Item 249, Appendix F)
Packing, Preformed (Item 194, Appendix F)
Locknut, Tube Fitting (4) (Item 87, Appendix F)
Gasket (Item 57, Appendix F)
Rag, Wiping (Item 59, Appendix C)
a. Removal.
CAUTION
Ensure all openings of turbocharger are covered
with wiping rags during removal.
Failure to
comply may result in damage to equipment.
(1) Remove self-locking nut (1) from clamp (2). Discard
self-locking nut.
(2) Remove lower exhaust pipe (3) from upper exhaust pipe
(4).
(3) Remove clamp (2) from lower exhaust pipe (3).
(4) Remove two bolts (5) from exhaust pipe bracket (6).
4-24
