TM 9-2320-365-34-2
6-6. STARTING MOTOR REPAIR (P/N M0017703ME) (CONT)
NOTE
Note position of spring washers prior to
removal.
(2) Remove nut (5), electrical lead (3), nut (5), two spring
washers (6), washers (7), isolator (8), and preformed
packing (9) from contact screw (10). Discard spring
washers and preformed packing.
(3) Remove nut (11) from starting motor solenoid terminal
(12).
(4) Remove nut (13) and strap (14) from field coil screw
(15).
(5) Remove two screws (16) from starting motor solenoid
(17).
CAUTION
Bendix must be moved to the engagement
position before the starting motor solenoid
can be rotated. Failure to comply may result
in damage to equipment.
(6) Rotate starting motor solenoid (17) so mounting bracket
is turned up.
(7) Remove starting motor solenoid (17) from shift housing
(18).
6-34
Change 1
