TM 9-2320-365-34-2
6-6. STARTING MOTOR REPAIR (P/N M0017703ME) (CONT)
(33) Remove sealing ring (50), preformed packing (51),
insulation washer (52), and two washers (53) from
contact screw (10). Discard sealing ring, preformed
packing, and insulation washer.
(34) Remove four screws (54) and contact screw (10) from
brush plate (55).
(35) Remove screw (56) from brush plate (55).
(36) Lift spring (57) and remove brush (58) from brush plate
(55).
(37) Perform steps (35) and (36) on three remaining brushes.
(38) Remove armature (28) from field ring (22).
(39) Remove washer (59) from armature (28).
6-36.2
Change 1
