TM 9-2320-365-34-2
NOTE
The rear of transmission/differential lift has
release knob and pump handle. Rear of
transmission/differential lift will go to front of
vehicle.
(41) Install two 90-degree brackets (62) on left side of
headplate (63).
(42) Install 90-degree bracket (64) on right side of
headplate (63).
(43) Position long adapter support bar (65) on two 90-
degree brackets (62) with bolts (66).
(44) Position two bolt circle adapters (67) on long adapter
support bar (65) with two bolts (68).
(45) Position transmission/differential lift under trans-
mission control valve module (69).
(46) Align headplate (63) front to rear by adjusting knob
(70).
(47) Align headplate (63) side to side by adjusting knob
(71).
(48) Remove bolt (72) from front of transmission (7).
(49) Position bolt circle adapter (67) on front of
transmission (7) with bolt (73).
Change 1
7-28.5
